After printing, close the Multi-Purpose Tray and the rear output tray. Flex or fan the edge of the envelope stack to separate the pages before loading. Cover it with a piece of paper if left exposed for more than a few minutes and keep it in a flat and clean place. Selecting The Output Location Selecting the Output Location The printer has two output locations; the rear output tray and the top output tray. Troubleshooting Reinstalling Status Monitor Open the control board cover. Choosing Paper and Other Materials You can print on a variety of print materials, such as plain paper, envelopes, labels, transparencies, and so on.
|Date Added:||21 July 2005|
|File Size:||12.55 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
If you experience problems with paper feed, turn the paper around.
Samsung ml-2250 series Envelope construction is critical. Page Remove any misfed paper by pulling it out by the visible edge.
Choosing Paper and Other Materials You can print on a variety of print materials, such as plain paper, envelopes, labels, transparencies, and so on.
Regular users can also run it to easily inspect job queues, examine the samsung ml-2250 series properties and change asmsung local preferences. Prepare a stack of paper for loading by flexing or fanning the paper back and forth. Tighten the two screws.
Select the desired samsung ml-2250 series options. From the File menu, select Print to open the Print window. Plug in the power cord, and turn the printer on. Using seriew mode will extend the life of your toner cartridge and reduce your cost per page, but will reduce the print quality. Reconnect the power cord and cables and then turn the printer on.
When you change the print settings from your software application, access the printer properties. Troubleshooting Checklist If the printer is not working properly, perform the series of checks in the list below.
Page 35 For the paper smaller than Letter, adjust the front paper length guide. samsung ml-2250 series
SAMSUNG ML SERIES USER MANUAL Pdf Download.
Printing a Reduced or Enlarged Document You can scale your print job on a page. Open the front cover.
Adjust the samsung ml-2250 series to fit the width of the transparencies. Press the Cancel button on the printer to start feeding. Page Align the printer with the support unit and lower it into place on the tabs.
Samsung ML Specs – CNET
Page Reinsert the toner cartridge and close the cover. Printing On Preprinted Paper Printing on Preprinted Paper Preprinted paper is paper that has some type of printing placed on it before it is sent through the printer paper samsung ml-2250 series has samsung ml-2250 series preprinted logo at the top of the page, for example. Introduction Special Features Your new printer is samwung with special features that improve the print quality, giving you a competitive edge. Installing the Printer Driver Cancel button Function Description Printing demo page In Ready mode, press and hold this button for about 2 seconds until all LEDs blink slowly, and release.
Printing can now be resumed. Unpacking Unpacking Remove the Printer and all accessories from the packing carton.
Installing PS Drivers PPDs, in combination with the PostScript driver, access the printer features and allow the computer to communicate with the serids. If you see samsung ml-2250 series jammed paper, remove the paper from the tray. Reinsert the toner cartridge into the printer.
For the best result, set this to the paper type you loaded in the samsung ml-2250 series of the printer. Open your network folder in the left column.
Samsung ML-2250 Driver
Cover it with a piece of paper if left exposed for more than a few minutes and keep it in a flat and clean place. The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity.
Printing A Document Printing a Document The following procedure describes the general steps required for printing from various Windows applications. For samsung ml-2250 series, see samsung ml-2250 series 4.
Selecting the Output Location The printer has two output locations; the rear output tray and the top output tray.